Dustless Floor Refinishing
Summers of sandy feet, strong sun through lake facing windows and rolling luggage leave the finish cloudy and scuffed. New sanding plus three coats lifts the grain back to the surface.
Summers of sandy feet, strong sun through lake facing windows and rolling luggage leave the finish cloudy and scuffed. New sanding plus three coats lifts the grain back to the surface.
Select a sheen from matte to satin. Oak and maple both take stain well, and the finish products ship from our warehouse in Long Branch, NJ.
Before the sander runs, we brush stain samples onto your own boards, so the color you pick is the color that dries in your Crest rooms.
A one year labor warranty stands behind the work. NWFA trained employees run every machine.

Decades of varnish on cottage oak come off in a few measured passes.

A rich walnut stain in a ranch den hides light scratches and warms the room.

Three coats of polyurethane protect a rental kitchen from wet feet and dragged stools.

Sun glaring off the lake fades color by big windows, and a fresh coat evens the room again.

Corners and stair landings are sanded by hand where the large machine does not fit.

Sealed doorways and vacuum sanders keep dust to one zone, so the rest of the home stays usable.



The $2.50/Sq Ft rate includes the sanding, the stain and three polyurethane layers. Leaving the bare wood alone, a screen and recoat is $1.00/Sq Ft.
Vacuum attachments catch dust as the machines cut, and doorways are sealed with plastic. A light wipe down is all you will see.
Often, yes. A screen and recoat can be done in a day or two, and a full refinish needs several days of cure time.
Socks are fine by the next day. Rugs and furniture wait several days while the coats set.
Strips that cracked or cupped are replaced ahead of the sander, so the finished color stays uniform. That repair is priced at the house.
Yes, as a flat $250 charge.
A visit reserved through the site is $250 off.
Twelve months on labor, done by our employees and never subcontractors.