Dustless Floor Refinishing
Years of kids, dogs and dragged chairs leave a hazy surface and gray lanes near the doors. Taking the surface down and adding three fresh coats lets the grain show again.
Years of kids, dogs and dragged chairs leave a hazy surface and gray lanes near the doors. Taking the surface down and adding three fresh coats lets the grain show again.
You pick the sheen, from matte through satin to semi gloss, and stain works on oak, maple and hickory. All finishing materials come off the shelves of our Long Branch, NJ warehouse.
We brush stain samples onto your actual floor before sanding, so the tone you approve is the tone that cures in your Waterford Township rooms.
A year of labor coverage backs the refinish. The sanders are our NWFA certified employees.

Layers of old varnish on Atco oak come off in several controlled passes.

A medium brown stain evens out boards that faded unevenly beside a big window.

Three thin coats give a high traffic hallway a tough shell against sneakers and pets.

Sun through a sliding door fades color in a dining room, and a fresh coat evens it.

Steps between split level floors are hand sanded where a drum machine cannot reach.

Plastic sheeting and vacuum equipped sanders keep dust out of the bedrooms.



Sand, stain and a triple coat cost $2.50/Sq Ft together. Leaving out the sanding to raw wood and doing a screen and recoat is $1.00/Sq Ft.
A dull finish with no worn through areas only needs a recoat. Worn spots and deep scratches call for a full sand.
Vacuum hoses attach to each sander, and plastic seals the doorways. Expect a light cleanup, not a layer over the furniture.
Most do. Odors hang around about a day, so we plan the room order to leave you a clear walkway.
Light foot traffic is fine after about a day. Furniture goes back in two to three days, rugs after a week.
Darker is straightforward, since stain goes onto sanded wood. Lighter means taking the old color down to bare oak.
Yes, $250 off the estimate. A flat $250 covers moving furniture.
A year on our labor from our own crew, plus the finish maker's warranty.