Dustless Floor Refinishing
Decades of boots, kitchen chairs and sun through the front windows leave a clouded, scratched finish. A fresh sand and three coats lift the grain back into view.
Decades of boots, kitchen chairs and sun through the front windows leave a clouded, scratched finish. A fresh sand and three coats lift the grain back into view.
We settle the sheen with you, from matte to satin, and match the stain to oak, maple or pine. Sealers and stains are stocked at our Long Branch, NJ warehouse.
Before sanding begins, stain samples go onto your actual boards, so the color you pick is the color that dries in a Swedesboro room.
Refinishing labor is guaranteed for a year. NWFA trained employees of ours run every machine.

Layers of old varnish on Victorian oak come off in a few careful passes.

A deep chestnut stain in a dining room hides old scuffs and warms the whole space.

Three coats of poly protect a front hall from boots, strollers and dragged chairs.

Strong afternoon light fades some stains, and a fresh coat evens out the color again.

Stair landings are hand scraped in the corners where the machine cannot go.

Plastic barriers and a vacuum hookup keep the dust off the rest of the house.



The $2.50/Sq Ft price pays for sanding to raw wood, staining and three poly coats. A screen and recoat is $1.00/Sq Ft.
Our machines pull dust into vacuums and doorways get plastic, so only a light film settles. We wipe the rooms down before we leave.
Yes, with gentler passes and a test sample, since pine takes stain unevenly.
You can walk in socks the next morning, and rugs wait a few days. We give you the cure schedule up front.
We replace them first so the finished floor reads even. That cost is quoted on site.
Yes, for a flat $250.
An online estimate booking cuts $250.
Our own employees, with a year of labor coverage.