Dustless Floor Refinishing
Years of dragged furniture, sun through tall windows and wet dog paws leave a tired surface. Fresh sanding and three new coats reveal the grain again.
Years of dragged furniture, sun through tall windows and wet dog paws leave a tired surface. Fresh sanding and three new coats reveal the grain again.
You choose from matte to satin, and oak and maple both accept stain well. Our supplies come out of our warehouse in Long Branch, NJ.
Before sanding starts, we put stain samples on your own boards, so the color you approve is the color that dries in your house.
Our labor is guaranteed for a year. The crew is made up of our employees, all trained to NWFA standards.

Large rooms with decades of wax and varnish need several passes to bring the wood back to clean grain.

A rich brown stain in a long upstairs hall evens the color after years of sunlight from end windows.

Three coats of polyurethane shield a dining room floor from spills, heels and heavy chairs.

Tall windows in a sunroom fade stain over time, and a fresh coat brings the color back together.

Corners and stair landings are hand sanded where the machine cannot reach.

We seal doorways and use vacuum sanders, so the rest of the house stays comfortable.



Stripping to bare oak, staining and adding three coats is priced at $2.50/Sq Ft. When bare wood is unnecessary, a screen and recoat drops to $1.00/Sq Ft.
We run vacuum attached sanders and tape plastic over doorways. Expect a light wipe down afterward, not a layer on the furniture.
We test samples on your boards until the tone is right, since oak and maple absorb stain differently.
Socks are fine the next day. Furniture waits a few days while the finish cures, and we lay out the schedule first.
Yes, we swap bad strips first so the whole floor sands and stains evenly.
We do, for a flat $250.
Yes. Reserving through the website saves $250.
One year on labor from our own employees, plus the manufacturer warranty on finish products.