Dustless Floor Refinishing
A century of winter boots, radiator heat and dragged furniture leaves the finish clouded. A sand to bare wood and three coats lift the grain back out.
A century of winter boots, radiator heat and dragged furniture leaves the finish clouded. A sand to bare wood and three coats lift the grain back out.
Sheen runs from matte to satin, and stain takes well on oak, maple and pine. Finish and stain come off the shelves of our Long Branch, NJ warehouse.
Before we sand, stain samples go onto your own boards, so the color you approve is the color that dries in your Pitman rooms.
Our labor is covered for a year. The sanders are our own employees and carry NWFA certification.

Old fir takes a gentler, patient sanding, so the character stays and decades of wax come off.

A medium brown stain on foursquare oak evens out the patches left by rugs and radiators.

Three coats of polyurethane protect a dining room from dropped serving dishes and chair legs.

Sun from a west facing porch fades color unevenly, and fresh stain brings the tone back together.

Stair landings and tight corners in a cottage are hand sanded where the machine does not fit.

Dust is contained and doorways are sealed so the rest of the house stays comfortable.



The $2.50/Sq Ft price includes sanding, staining and three coats. If a screen and recoat is enough, that is $1.00/Sq Ft.
Our sanders draw dust into containment, and doorways are sealed with plastic sheeting. You will wipe a bit afterward, not clear a layer off the furniture.
We test samples on your boards until the tone fits, because oak, fir and maple take stain differently.
Socks are fine the following day. Furniture returns after a few days of curing.
Yes. Cracked or cupped strips are replaced first so the finished floor looks uniform.
We do, for a flat $250.
Booking the estimate online takes $250 off.
A year on labor, from our own employees and never subcontractors.