Dustless Floor Refinishing
A century of winter boots, radiator heat and afternoon sun through bay windows dulls a finish to gray. Sanding afresh and adding three coats lets the grain show again.
A century of winter boots, radiator heat and afternoon sun through bay windows dulls a finish to gray. Sanding afresh and adding three coats lets the grain show again.
Sheen is your decision, from matte to satin, and stain works on oak, maple and old pine alike. Our Long Branch, NJ warehouse is the source for the coatings.
Stain samples go on your own boards before the sander starts, so the shade you choose is the shade that dries in your rooms.
Labor is guaranteed for twelve months. The sanding team is our own, trained to NWFA standards.

Old pine takes a lighter touch on the sander so its soft grain keeps its character.

A deep walnut stain covers decades of scuffs and makes a shared hall feel kept up.

Three coats seal a kitchen floor against spills and the drag of chairs.

Sun through bay windows fades stain unevenly, and a new coat evens the tone.

Behind radiators and on stair landings we sand by hand, since the drum cannot get in.

Doorways are closed with plastic and the sander feeds a vacuum, so neighbors and bedrooms stay clean.



A $2.50/Sq Ft rate covers the sand, the stain and three coats. Screen and recoat is $1.00/Sq Ft.
Each machine pulls dust into a vacuum while plastic seals the doorways. A light film wipes up afterward.
Samples go on your boards until the tone fits, because pine, oak and maple differ.
In socks the next day. Give the finish a few days to cure before furniture comes back.
Yes. Split or cupped strips are replaced before sanding, with repairs quoted on site.
Yes, for a flat $250.
The online estimate comes with $250 off.
Our own crew, with twelve months on labor.