Dustless Floor Refinishing
Decades of dragged chairs, pet nails and afternoon sun leave floors flat and gray. Sanding down and sealing again brings the grain forward.
Decades of dragged chairs, pet nails and afternoon sun leave floors flat and gray. Sanding down and sealing again brings the grain forward.
You choose matte, satin or gloss, and the stain takes well on oak and maple. Every finish product is stocked in Long Branch, NJ, ready for the truck.
Stain swatches go onto your floor before we sand, so the shade you pick is what shows after the last coat cures.
Our work carries a year of labor coverage. The sanding crew is our own employees, trained to NWFA standards.

Layers of old wax on a bungalow floor come off in successive passes until clean oak shows.

A walnut stain hides old marks in a twin living room and gives the walls a warmer backdrop.

Three coats of poly protect a small kitchen floor from spills and rolling stools.

Sun fades the boards under a front window, so we blend the lighter patch into the rest.

Narrow stair landings get scraped by hand where a machine cannot reach.

Plastic barriers and a vacuum sander leave the rest of a small home usable.



The complete service, bare wood sanding plus stain plus three poly coats, runs $2.50/Sq Ft. Screen and recoat leaves the raw wood alone and costs $1.00/Sq Ft.
Our sanders are tied to vacuums and doorways are sealed with plastic. Afterward you wipe a light film, not a thick layer.
Surface marks sand out. A stain that went through the wood is cut out and replaced with matching strips first.
Socks are okay by the next morning, while rugs and sofas should wait several days. Before we begin, we go over the curing calendar with you.
It will, because we test on your own boards. Oak and maple take color differently, so photos are not enough.
Yes, for a flat $250.
Booking online takes $250 off.
A year of labor, performed by our own staff and never a subcontractor.