Dustless Floor Refinishing
Sanders feed a vacuum system that collects grit in sealed bags, which keeps dust off drapes and antiques. Edges and corners get a detail pass.
Sanders feed a vacuum system that collects grit in sealed bags, which keeps dust off drapes and antiques. Edges and corners get a detail pass.
A typical first floor takes three to four days, plus a spare when it is humid. Socks the next day, furniture on day three.
A board warped by a dishwasher leak is cut out and replaced from $150, then blended so the repair disappears after finishing.
Our employees are licensed, insured and NWFA certified, with a one-year labor warranty. Half is paid as sanding begins, half after the last coat.

No tint at all, just clear coat over sanded oak, brightens a small cottage room that gets little sun.

Medium brown stain hides boot scuffs and the family dog's claw marks in a busy household.

A smoky gray-brown tones down the orange in red oak laid decades ago, a common find in older houses.

Warm golden stain suits the center-chimney houses around the green, where the wood is already a century old.

Deep walnut shows every grain line and gives a candlelit dining room a formal, grounded look.

Espresso black pairs with a new great room addition, though lint and dust show against it.



Most jobs start the day after we agree on it. The crew is close by, so we can come look at the floor, measure it and get going fast, often within a day.
For under 1,500 Sq Ft, clear runs 3 days and stained floors run 4, plus one extra day. Socks are fine after 24 hours and furniture goes back at 48.
Sure. Loose boards get nailed down and damaged ones are swapped from $150 each before sanding, so the floor feels solid and quiet underfoot.
Oil based turns amber over time and feels classic. Water based Bona stays clear with much less smell. The price is the same per Sq Ft with us.
Yes, it really is. Each sander feeds a collector as it runs. Afterward, walls and ceilings get blown down, and the rooms are vacuumed before the first coat.
Half is due when our team begins sanding, and the rest the day the final coat goes on. No money is taken before work begins, not even a deposit.
Refinishing is $2.50/Sq Ft, with stain and three coats of polyurethane included. Floors with a healthy finish can take a $1.00/Sq Ft screen and recoat instead.
Yes, gently, and we tell you at the estimate how much wood is left to sand. Boards too thin to take another pass are flagged before any machine starts.
Furniture returns after about 48 hours, and socks are safe after 24. A humid week stretches that by a day.
Hardly any reaches the air, because every machine runs into a sealed vacuum bag. Rooms are cleaned before the crew leaves.
Please be there when the crew arrives on the first day. After that, access is arranged with you.
Cracked or stained boards are replaced from $150, quoted at the visit, and blended in ahead of the sanding.
You pay 50% as sanding starts and 50% at the final coat. No other payments are due.
Yes, refinishing runs $50 per step with the finish brushed by hand. Risers are quoted separately.