Dustless Floor Refinishing
Mark scratches and discoloration so we can inspect them under direct light. Let the estimate spell out the preparation. Photograph both sides of the opening.
Mark scratches and discoloration so we can inspect them under direct light. Let the estimate spell out the preparation. Photograph both sides of the opening.
By Kent Cliffs, compare stain trials beside the woodwork you plan to retain. Show any areas repaired in the past. Look at samples where the floor gets daylight.
By Kent Cliffs, check prior sanding near vents or thresholds exactly where the floorboard edge can be seen. Note which rooms need to remain accessible.
Near Lake Carmel, ask when you can walk, return furniture and put rugs down again. Look at samples where the floor gets daylight. Photograph both sides of the opening.

In Kent, a clear finish lets the original color and grain show after the wood is sanded.

Near Lake Carmel, a warm medium brown can soften the contrast between oak grain and everyday wear.

By Kent Cliffs, try a neutral brown on prepared red oak and compare it with the surrounding existing trim.

Near Lake Carmel, a rich brown with a red undertone can draw out warmth near brick or painted wood.

In Kent, a dark walnut trial helps show how much grain stays visible under the chosen finish.

By Kent Cliffs, espresso is nearly black. Test a sample in full daylight before choosing it for a large room. Share how the room is used.



Include old repairs in your photos and show where the existing work meets the new scope. Discuss sanding depth before choosing the material or finish.
Check building or property access and share any photos of how the finish dries. Let us know which areas need to remain usable while the work is under way.
We can look for a suitable dividing point. Continuous boards may show a line if the two areas receive different work.
A dark color alone does not determine sanding depth. Previous work and the condition of the boards govern what is practical.
Show us old invoices or repairs if you have them. We look at the remaining wear surface before agreeing to sand again.
It depends on the cause and depth of the discoloration. A sample or board inspection can establish realistic options.
Yes. Review a test beside the windows and in an area with less daylight.
Timing depends on the finish system and site conditions. Ask for separate instructions for walking, furniture and rugs.