Dustless Floor Refinishing
Twenty years of furniture dragged across it and light pouring through a two story window leave a floor flat and patchy. A new sand and three coats restore the grain.
Twenty years of furniture dragged across it and light pouring through a two story window leave a floor flat and patchy. A new sand and three coats restore the grain.
You decide on sheen, matte through satin, and the stain suits oak, maple or ash. Supplies come off the shelf at our warehouse in Long Branch, NJ.
Stain samples go on your own boards before the sander starts, so the shade you choose is the one that dries in your Holmdel rooms.
We guarantee labor for one year, and the refinishers are our own staff, trained to NWFA standards.

Original oak in a 1970s hallway usually takes just a few passes to reach clean wood.

A deep walnut stain in a family room covers old scratches and warms the whole room.

Three coats of polyurethane shield a kitchen floor from dropped pans and dragged chairs.

Tall windows fade stain along the glass, and a fresh coat evens the color again.

Stair landings between floors are sanded by hand where the machine cannot reach.

Plastic barriers and vacuum sanders keep dust in the room being worked.



The full process with sanding, stain and three coats is $2.50/Sq Ft. A screen and recoat for floors that only need freshening is $1.00/Sq Ft.
Most families do. Dust is contained, doorways are sealed, and we finish one area at a time.
We test samples on your own boards against the cabinets until the tone works, since each wood takes color differently.
Stocking feet are fine the day after, while furniture waits a few days for the finish to cure. We lay out that timeline before work starts.
They are replaced ahead of sanding so the result looks even.
It is optional at a flat $250.
Yes, an estimate booked on the website saves $250.
Employees of ours, backed by a twelve month labor warranty.