Dustless Floor Refinishing
Thirty years of foot traffic, moved furniture and sun through street side windows leave a floor gray. Sanding it back and sealing it restores the grain.
Thirty years of foot traffic, moved furniture and sun through street side windows leave a floor gray. Sanding it back and sealing it restores the grain.
You choose the sheen from matte to satin, and we adjust stain for oak or maple. Product is stocked at our Long Branch, NJ warehouse.
Before any machine runs, stain samples go on your own boards, so the color you approve matches the dried floor in your Hillside rooms.
Refinishing carries one year on labor. Everyone sanding your floor works for Brazil Floors and is trained to NWFA standards.

Floors from the 1930s often need several passes to remove years of wax and varnish.

A dark walnut stain hides stubborn stains and gives a dining room a formal tone.

Three coats of polyurethane shield a kitchen floor from spilled pots and dragged chairs.

Street facing windows bake the boards, and a fresh sand evens out the faded patches.

Hand sanding gets into closets and stair landings that the machine cannot enter.

Doors are sealed in plastic and a vacuum runs with the sander, so the other unit stays clean.



The complete job, sanding through the third coat, is $2.50/Sq Ft, while a screen and recoat that leaves the bare wood alone is $1.00/Sq Ft.
Sanders run through dust extraction and we seal doorways with plastic. A light wipe afterward is all most homes need.
We test samples on your boards until it fits, since species take stain differently.
Socks after a day, furniture after several days of curing. We lay out the timing at the start.
We swap them out before the sander comes in, which keeps the finished surface level, and we price that at the house.
Yes, for a flat $250.
Booking the estimate online saves $250.
Our own employees, with one year on labor.