Dustless Floor Refinishing
Years of sandy feet, rolling chairs and sun through big windows leave a flat, cloudy finish. A fresh sand and three coats of poly pull the grain forward.
Years of sandy feet, rolling chairs and sun through big windows leave a flat, cloudy finish. A fresh sand and three coats of poly pull the grain forward.
Sheen runs from matte to satin, and color goes in evenly on oak and maple. Stain and poly come from our Long Branch, NJ warehouse.
Stain samples are brushed onto your own boards before sanding starts, so the shade you choose is the one that cures in your room.
We guarantee labor for twelve months, and our sanders are staff members trained to NWFA standards.

Floors that sat under carpet for years often need only two passes to reveal clean oak.

A golden stain evens the lighter zones left behind by long-lived area rugs.

Three coats of poly leave hallway floors ready for dogs and dragged chairs.

Sun through a patio slider fades color over the years, and sanding resets the room.

Stair noses and landings are hand sanded wherever the drum cannot reach.

Plastic seals the doorways and a vacuum captures dust at the source, which spares the bedrooms.



Sanding, stain and three coats come to $2.50/Sq Ft locally. If sanding to bare wood is unnecessary, a screen and recoat is $1.00/Sq Ft.
Sanders connect to vacuums and doors are sealed with plastic. You should only need a light wipe afterward.
We test samples on your own boards until one lands close, since oak and maple take stain differently.
You can cross the floor in socks next day; wait several days before the sofa returns. The timeline is explained before we start.
They are replaced before sanding so the surface turns out even, with the price given at the visit.
Yes, for a flat $250.
Yes, $250 comes off when the estimate is reserved online.
Employees only, no subcontractors, and the labor is warranted for twelve months.