Dustless Floor Refinishing
Years of kitchen stools, indoor basketball and afternoon sun through the patio door cloud a finish. A fresh sand and three coats uncover the grain again.
Years of kitchen stools, indoor basketball and afternoon sun through the patio door cloud a finish. A fresh sand and three coats uncover the grain again.
Pick matte, satin or more sheen. Stain sits evenly on oak and maple, and coatings are stocked in the Long Branch, NJ warehouse.
We brush stain samples on your own floor before sanding, so the shade you approve is the one that cures in your rooms.
Labor is warranted for a year, and the sanders are our own employees with NWFA certification.

Strip oak in an older ranch hallway often needs several passes to lift layers of varnish.

A medium brown stain in a dining room hides scratches and ties the floor to the table.

Three polyurethane coats shield a kitchen floor from juice spills and dragged stools.

Sun through a patio slider bleaches stain over time, and a fresh coat evens the tone out.

Steps leading to a sunken den are hand sanded where the machine will not fit.

Doorway sheeting and a vacuum-fed sander keep dust out of the rest of the house.



The full process of sanding, staining and sealing with three coats is $2.50/Sq Ft, and the lighter screen-and-recoat route that leaves the wood unsanded is $1.00/Sq Ft.
Sanders run through vacuum containment and doorways are sealed with plastic. Afterward there is only a light wipe-down.
Usually, as long as the wear layer is thick enough. We check thickness while measuring and tell you honestly.
Socks are fine the next day, and furniture waits a few days while the coating hardens. You get the schedule before work starts.
We try samples on your boards until the tone is close, because oak and maple absorb color differently.
Moving is a flat $250 when you want the crew to do it.
An estimate booked online takes $250 off.
One year on our labor, performed by our own employees and never subcontractors.