Dustless Floor Refinishing
Western sun over the Hudson bleaches the finish unevenly, and heels and rolling chairs dull the rest. A new sanding and three coats pull the grain back out.
Western sun over the Hudson bleaches the finish unevenly, and heels and rolling chairs dull the rest. A new sanding and three coats pull the grain back out.
Choose a matte, satin or gloss sheen. Low-odor finishing products are stocked at our warehouse in Long Branch, NJ.
Before any sanding, stain samples go onto your own boards, so the shade you approve is the shade that dries in your unit.
Labor is warrantied for twelve months, and the crew is made up of our own employees trained to NWFA standards.

Low-dust sanding suits tower condos, where ventilation is shared and neighbors are a wall away.

A medium brown stain evens out sun-faded patches across a floor facing the river.

Water-based poly dries clear with low odor, which matters inside a shared building.

Floors beside balcony doors lose color first, and a refinish makes the whole room match again.

Stair landings and tight closet corners get hand scraping where the machine cannot reach.

Plastic sheeting and vacuum-attached sanders keep the dust inside your unit.



Sanding, staining and three poly coats comes to $2.50/Sq Ft. A recoat that skips bare-wood sanding drops to $1.00/Sq Ft.
Sanders run into vacuums and we use low-odor water-based finish. We also tape off doors and follow your building's work hours.
Going lighter means sanding to bare wood first, which is the core of this service. We test shades on your boards before committing.
Socks can walk on it the day after the last coat. Heavy furniture and rugs wait several days for the finish to harden.
They come out before sanding so the finish reads even. Board replacement is quoted on site, from $150.
For a flat $250 the crew clears the rooms and sets everything back.
The estimate comes down by $250 when you book there.
Our own employees return to correct it, and labor is guaranteed for a year.