Dustless Floor Refinishing
Near Beach 44th Street, mark scratches and discoloration so we can inspect them under direct light. Ask about the smallest area that can be worked on.
Near Beach 44th Street, mark scratches and discoloration so we can inspect them under direct light. Ask about the smallest area that can be worked on.
Compare stain trials beside the woodwork you plan to retain. Set aside a photograph of the existing joint. Discuss the entry route before materials are ordered.
Near Beach 44th Street, check prior sanding around vents or thresholds where the board edge can be seen. Show the estimator the edge that matters most.
Ask while you can walk, return furniture and put rugs down again. Include the neighboring space while you take pictures. Show the estimator the edge that matters most.

In Edgemere, a clear finish lets the original color and grain show after the wood is sanded.

By Beach 44th Street, a warm medium brown can soften the contrast between oak grain and everyday wear.

Try a neutral brown on prepared red oak and review it with the surrounding trim. Mark the areas to retain.

In Edgemere, a rich brown with a red undertone can also draw out warmth near brick or painted wood.

A dark walnut trial helps show how much grain stays visible under the chosen finish.

In Edgemere, espresso is nearly black. Test a sample in full daylight before choosing it for a large room. Check the edge at the doorway.



Start with old finish, repairs and areas of heavy wear. Point out the area with the heaviest wear before choosing a sheen.
Point out a swollen board at the Rockaway entrance in the photos you send. Point out the area with the heaviest wear before choosing a sheen.
Ask how the installer will handle the available wear layer and sheen. The assessment separates normal surface wear from boards that may need other work.
A dark color alone does not determine sanding depth. Previous work and the condition of the boards govern what is practical.
Show us old invoices or repairs if you have them. We look at the remaining wear surface before agreeing to sand again.
It depends on the cause and depth of the discoloration. A sample or board inspection can establish realistic options.
Yes. Review a test beside the windows and in an area with less daylight.
Timing depends on the finish system and site conditions. Ask for separate instructions for walking, furniture and rugs.