Dustless Floor Refinishing
Forty years of sneakers, a table dragged to the same corner each Thanksgiving and sun through the patio door. Sanding removes the wear and fresh coats seal the wood.
Forty years of sneakers, a table dragged to the same corner each Thanksgiving and sun through the patio door. Sanding removes the wear and fresh coats seal the wood.
We help pick the sheen, from matte to semi gloss, and the stain behaves on red and white oak. Everything we spray, roll and brush is kept in our Long Branch, NJ warehouse.
Before sanding, stain samples dry on a section of your floor, so you approve the real color rather than a printed card.
Labor is covered for one year, and the NWFA certified team are our own employees.

Oak laid in the seventies is thick enough to sand several times, and ours takes it cleanly.

A darker stain hides the pale sun bleached patches near a patio door.

Three coats on the kitchen floor withstand spilled juice and scraping stools.

Scuffs from a dog's daily laps down the hall disappear after sanding.

Stair landings and doorway thresholds are sanded by hand where the machine cannot go.

Dust barriers go up in each doorway so the bedrooms remain clean.



Sanding with stain and three coats comes to $2.50/Sq Ft. When no stripping is needed, a screen and recoat is only $1.00/Sq Ft.
Sanders attach to vacuums and plastic seals the doorways. You will wipe a light film, not shovel a coating.
Almost always. Strip oak of that era has plenty of wear layer left for a full sand.
Stocking feet the next day, then furniture after a few days of curing. We share a timeline before starting.
They are replaced before the machine starts so the floor sands even, priced on site.
That is a flat $250.
Yes, $250.
A year on labor from our own staff.