Dustless Floor Refinishing
Mark scratches and discoloration so we can inspect them under direct light. Bring a room sketch to the site visit. Raise any access constraints at the quote.
Mark scratches and discoloration so we can inspect them under direct light. Bring a room sketch to the site visit. Raise any access constraints at the quote.
Compare stain trials beside the woodwork you plan to retain. An estimate can identify work outside the main space. Keep a record of any prior work on the floor.
Near Montauk, inspect prior sanding around vents or thresholds where the board edge can be seen. Include the neighboring space while you take pictures.
Ask while you can walk, return furniture and put rugs down again. Discuss the entry route ahead of materials are ordered. Set aside a photograph of the existing joint.

By Montauk, a clear finish lets the original color and grain show after the wood is sanded.

In East Hampton, a warm medium brown can soften the contrast between oak grain and everyday wear.

Try a neutral brown on prepared red oak and review it with the surrounding trim. See samples near Montauk.

Near Wainscott, a rich brown with a red undertone can draw out warmth by brick or painted hardwood.

A dark walnut trial helps show how much grain stays visible under the chosen finish.

Near Wainscott, espresso is nearly black. Test a sample in full daylight before choosing it for a large room. Check the floor edge first.



Start with old finish, repairs and areas of heavy wear. Point out the area with the heaviest wear before choosing a sheen.
Point out a mat well in the Montauk entry in the photos you send. Point out the area with the heaviest wear before choosing a sheen.
Ask how the installer will handle the available wear layer and sheen. The assessment separates normal surface wear from boards that may need other work.
Show us old invoices or repairs if you have them. We look at the remaining wear surface before agreeing to sand again.
It depends on the cause and depth of the discoloration. A sample or board inspection can establish realistic options.
Yes. Review a test beside the windows and in an area with less daylight.
Timing depends on the finish system and site conditions. Ask for separate instructions for walking, furniture and rugs.
We inspect damaged or moving pieces first. Repairs that affect the finished surface belong in the work plan before sanding.