Dustless Floor Refinishing
Woodstove soot, lake water and bright summer sun through big windows dull a good finish. A deep sand and three coats bring the grain back.
Woodstove soot, lake water and bright summer sun through big windows dull a good finish. A deep sand and three coats bring the grain back.
The sheen is your call, anywhere from matte to satin, on oak or maple. The finishes are stocked at our Long Branch, NJ warehouse.
Stain samples are brushed onto your own floor before sanding, so the color you approve is the one that dries in your Byram rooms.
Refinishing has one year of labor coverage. Our NWFA certified employees run every machine.

Softer pine in old cottages gets a gentle sanding pass so we never cut too deep.

A warm brown stain in a colonial family room hides scratches and adds depth.

Three coats of poly shield a back hall from boots and tracked in water.

Sun reflecting off the lake fades stain near big windows, and fresh coats even the color out.

Corners near a woodstove hearth are hand sanded where the machine cannot reach.

Plastic goes up at the doorways and the sander is vacuum fed, so the rest of the house stays livable.



From the first sanding pass to the last coat, the refinish is $2.50/Sq Ft. The lighter option, a screen and recoat over the existing finish, is $1.00/Sq Ft.
Usually yes. Pine is soft, so we sand gently and check board thickness first.
Our sanders gather most of the dust, and plastic closes off each doorway. A light film is the worst of it.
Socks after a day, and furniture goes back after a few days of curing.
Those boards come out first, and we price the swap at the house.
Yes, for a flat $250.
Booking the estimate online takes $250 off.
One year on labor, from our own crew.