Dustless Floor Refinishing
Our sanders pull into a vacuum hose, so grit goes into a sealed bag instead of the sofa. A final pass clears the corners and trim.
Our sanders pull into a vacuum hose, so grit goes into a sealed bag instead of the sofa. A final pass clears the corners and trim.
For a floor under 1,500 Sq Ft, plan on three days without stain or four with it, plus a spare day when the air is humid. Socks after 24 hours, furniture after 48.
A board warped by a leaking washer or scratched by a crate is cut out and replaced from $150, then blended into the room.
Our own licensed, insured, NWFA certified crew backs the labor for a full year. You pay 50% when sanding starts and 50% at the final coat.

A clear coat with no color keeps oak light and airy in the small cottages around the lake.

A medium brown covers boot scuffs and dog fur in a busy family cape.

A cool, smoky shade calms the orange cast in red oak found in many ranches from the sixties.

A golden tone with a bit of red warmth fits the older farmhouses near the center of town.

Deep walnut that exposes each grain line looks right under a dining table in a country colonial.

Near-black stain looks sharp in a modern remodel, though pet hair and dust show quickly.



The rate is $2.50/Sq Ft, covering sanding, stain and three polyurethane coats. If the finish still has life, a screen and recoat at $1.00/Sq Ft may be enough.
Yes. Sanding takes off the yellowed finish, and a cooler stain tames the red. You see swatches on your own boards first.
Walk in socks after about 24 hours and set furniture back after 48. Humid weeks add a buffer day.
Machines connect to vacuums that collect the dust in sealed bags. The crew cleans each room before leaving.
Someone should be there to let the crew in on the first day. After that, we coordinate access with you.
Bad boards are replaced from $150, quoted on site. They are blended in before sanding so the color evens out.
Payment splits 50% at the start of sanding and 50% at the final coat, with no other charge in between.
Yes, at $50 per step. The cost covers sanding and a hand-brushed finish, but risers are quoted separately.